Alfano

Replacement Tyre Pressure Case for Alfano 

Special cable 200cm for 0-5V sensor connections, must be connected to the Lambda input of the Box12 A1160.- Yellow Wire = Ground (GND)- Red wire = ...

ALFANO BOX EXPANSION EXTETNION LEAD 5 PIN 75CM

Download cable : Tyrecontrol Air Alfano 6 40cm

Alfano 2015 Bus Cable For Pro 111 Evo 75Cm - Extension Cable Bus - A3102

HUB with 2 inputs : SPEED + MAGNETIC - 20cmNew model, this Hub A2194 replaces the old model A2192.This HUB allows the simultaneous connection of a ...

Cable for charging the ALFANO battery (cable supplied with ALFANO). Warning this cable does not function for downloading data.

Y extension for "NTC" + "K" - 135cmY-extension to connect 2 sensors: one "K" technology thermocouple sensor + one "NTC" technology sensor

Alfano manual cable 3m long Can be used to manually send a signal to the datalogger for lap times. Good for use on for example a dyno or if you do ...

REPLACEMENT TEMPERATURE PROBE FOR ALFANO TYRE CONTROL 

Alfano Replacement Pipe For New Tyre Control2 A1900 &A1910

USB cable for downloading data from the ALFANO, also for charging the battery of the Alfano

K" MOVE sensor - 10mm/40cmThis sensor of thermocouple K technology must be installed with a 10mm diameter spark plug.Caution: it is important to re...

This sensor of thermocouple K technology must be installed with a 12mm diameter spark plug.Caution: it is important to remove the sealing washer fr...

Water Sensor "K" - M10/40cmThis thermocouple K technology sensor with 10mm metric threads can be connected either to the motor head if the motor i...

FANO magnetic sensor 125 cmThanks to its 125 cm wire, this magnetic sensor is perfect for the use in car.Suitable with ALFANO ADSMAG stopwatch.Allo...

NTC Water Sensor 1/8GAS - 45cmThis NTC technology sensor with 1/8GAS thread can be connected to the cylinder head of the motor if the motor is equi...

Water Sensor "K" - M5/40cmThis thermocouple K technology sensor with a 5mm metric thread can be connected to the motor head if the motor is equippe...

Pedal position sensor - 120cmThis Hall-effect sensor is used to measure the position of the brake or accelerator pedal.Designed for the module: Box...

Alfano Infra Red Transmitter

K" MOVE sensor - 14mm/40cmThis sensor of thermocouple K technology must be installed with a 14mm diameter spark plug.Caution: it is important to re...

SPEED SENSOR - 195cmNew model (10-03-2019), this speed sensor can be installed directly on the Alfano 6 and on the PROIIIevo (in the green connecto...

Designed for reading the coded infrared beams of ALFANO transmitters, ref. A4100Please note: this item is delivered in the box with the PROIIIevo, ...

MAGNETIC Sensor - 90cmDesigned to pick up magnetic tapes installed on circuitsPlease note: this item comes in the box with the PROIIIevo. Option fo...